6. Switch the main power switch on. After about 5 seconds, the LCD will display “Please wait…” Then,
about 60 seconds later, the LCD will display “Program UpDate Menu P.01” on the first line and the
name of the firmware on the second line (e.g. System/Copy).
7. Press the "OK" key to select a module.
• To scroll through the menus, press the or keys [A].
• To view the firmware version, press the right key. "ROM" is the information on the current
firmware. "NEW" is the information on the firmware in the SD card.
• To return to the menu, press the key.
• To select the module, press the OK key.
• To scroll through the module name, the serial number, and the version, press the key or
key.
• If you wish to install the following firmware simultaneously, press the START key. The scroll keys
can be used to confirm that this firmware has been selected (highlighted with a dark background).
[Engine, FCU, Scanner, Printer, Printer Font, Security Module]
• Please note that the following firmware cannot be updated simultaneously. The update
procedure must be repeated for each individually.
• System/Copy, ServiceCardNetFile, ServiceCardNIB, ServiceCardFAX,
ServiceCardWebSystem.
Service Program
227
To Next Page
Loading...
