Part A - General information cobas p 512
1-8 Operator's Manual - Version 1.6 - 10/2015
Signs and Symbols
Various symbols are used in this manual for the localization and interpretation of
information. They are explained below.
ftware
This symbol references another section of the Operator's Manual.
NOTICE
Notice: This indicates advice which the operator should observe in order to guarantee optimal
operation of the unit.
CAUTION
Caution: This symbol indicates a potential hazard. If this warning is not
heeded, the system can be damaged.
WARNING
Warning: This symbol indicates a potential hazard. The operator may be at risk
if the warning is not heeded.
WARNING
Crush hazard: This symbol warns the operator not to reach inside areas where
there is a risk of injury from moving parts of the system.
WARNING
Risk of infection: This symbol warns of the risk from infectious samples.
WARNING
Mains voltage: This symbol warns of areas in which the mains voltage is
applied.