Part B - System description cobas p 512
2-34 Operator's Manual - Version 1.6 - 10/2015
2.4.3 Cleaning brush
The waste tube on the fecapping module should be cleaned regularly using the cleaning
brush.
Figure 2-26: Cleaning brush for the decapper waste tube
For further information please refer to chapter 4 'Maintenance'.
2.4.4 Cleaning sets
A cleaning fluid and cloth is included in scope of supply to clean the camera lens of the tube
recognition module.
2-27: cobas p 512 cleaning set
2-28: Cleaning kit, camera
To clean the sensors, a cleaning kit – comprising a lint-free cloth, compressed air spray and
10 cotton swabs – is available as an option.
To Next Page
Loading...