cobas p 512
Operator's Manual - Version 1.6 - 10/2015 III
Manual version
Intended use
The cobas p 512 pre-analytical system and cobas p 512 CCM variant pre-analytical system
are computer controlled fully automatic systems for sorting of open and closed barcoded and
centrifuged sample tubes as well as decapping and recapping of such.
They further include modules for registration of barcoded sample tubes, liquid level and
sample quality detection.
In case of standalone use of the cobas p 512 pre-analytical system, the transfer of tubes,
processed on the cobas p 512 pre-analytical system, to any other workstation within the
laboratory is subject of validation performed by the laboratory itself.
Software compatibility
The Operator's Manual has been written for the cobas p 512 with software version 1.6.1 or
higher.
Copyrights
This manual is a product of Roche PVT GmbH.
All rights are reserved. No part of this manual may be reproduced in any form (print,
photocopy, microfilm or another procedure) or processed using electronic systems, copied
or distributed without the written permission of the company.
The company assumes no liability for any errors, omissions or damages resulting from the
use of the information contained in this manual.
Note: All of the product names contained in this manual are trademarks of the respective
companies. If the trademark symbols © or ® are not included, it cannot be assumed that the
name is an unregistered product name.
The content of this manual is subject to change without any communicative obligations by
the company.
Copyright© Roche PVT GmbH, Waiblingen 2014
To Next Page
Loading...