Roche Diagnostics
Operator’s Manual · Version 3.0 9
Multiplate® analyzer
LIS support and Worklist window LIS support was added. Use the new Worklist window to do the following:
o Download orders from the LIS.
o Assign orders to channels.
o Start autopipette measurements.
o Upload results to the LIS.
o Manage orders.
u Worklist (p. 81)
u Performing measurements using the worklist (p. 107)
u Sending results to LIS from measurements created on the analyzer (p. 128)
u Deleting orders from the worklist (p. 134)
The LIS communication is configured in the LIS configuration window.
u LIS configuration (p. 161)
Electronic QC Information about the Electronic QC window was added.
u Electronic QC (p. 95)
Reruns Use the worklist to rerun an order. Rerun orders are indicated in the Test field in the
Worklist window with Rerun and the rerun number (for example Rerun 1).
u Rerunning an order (p. 129)
Result deletion Information on how to delete result data was added.
u Deleting result data (p. 133)
M ul tiplate passwords The purpose of the level 1 and level 2 Multiplate passwords has been changed: the
level 1 password is an operator password and the level 2 password is an administrator
password. Both passwords have different access levels for the configuration options.
u Passwords (p. 149)
Test ID A unique test ID used on the LIS was introduced.
u Test ID (p. 158)
To Next Page
Loading...
