Rohde & Schwarz R&S SGS100A - Page 125

Signal generator settings
R&S
®
SGS100A
125User Manual 1173.9105.02 ─ 13
Modulation signal sources
The R&S SGS provides the following signal sources for the signal modulation:
●
Internal: A high-performance pulse generator that allows you to generate either
single or double pulse signals
●
Externally supplied signal: the instrument expects the pulse modulation signals
at the "TRIG" connector.
Pulse modulation signal waveforms
The high-performance pulse generator enables you to generate single or double pulse
signals.
Figure 9-4: Pulse generator - single pulse mode
1 = Pulse period
2 = Pulse width
3 = Pulse delay
Figure 9-5: Pulse generator - double pulse mode
Pulse modulation