Rohde & Schwarz R&S SGS100A - Security

General instrument settings and instrument setup
R&S
®
SGS100A
148User Manual 1173.9105.02 ─ 13
Settings
Protection Level / Password........................................................................................148
Protection Level / Password
"Protection Level 1" can be activated to expand the functionality of the internal adjust-
ment. The password is 123456.
The other protection levels 2 to 4 provide access to protected service functions. Only
the authorized personnel of R&S service departments can access these functions.
10.6 Security
The R&S SGS employs a security concept based on user and security password. The
security password is required for changing several critical settings, like performing firm-
ware updates. Access to the passwords and mass storage security settings is provided
in the "Security" dialog.
Access:
► Select "SGMA-GUI > Instrument Name > Setup > Security".
The dialog is divided into the password sections and the security settings section. In
the password section, the passwords for securing a controlled access to the instrument
are defined and changed.
A change of passwords for the operating system and security password requires the
entry of the old and new password and the conformation of the new password. All set-
tings are only accepted after the "Change Password" button is pressed.
Security