Network operation and remote control
R&S
®
SGS100A
203User Manual 1173.9105.02 ─ 13
The instrument home page (welcome page) opens.
The navigation pane of the browser interface contains the following elements:
● "LXI"
– "Home" opens the instrument home page.
The home page displays the device information required by the LXI stan-
dard, including the VISA resource string in read-only format.
– "Device Indicator" activates or deactivates the LXI status indication.
When activated, the LXI LEDs flash in the browser dialog. A green LXI sta-
tus symbol indicates that a LAN connection has been established; a red
symbol indicates that no LAN cable is connected.
– "Lan Configuration" allows you to configure LAN parameters and to initiate
a ping, see Chapter 12.6.3, "LAN configuration", on page 203.
– "Status" displays information about the LXI status of the instrument.
– "Utilities" provides access to the LXI event log functionality required by the
LXI standard.
● "Instrument Control"
– "Web Control" opens the R&S SGS Web-GUI for remote access to the
instrument, see Chapter 5.2, "Configuring a CW Signal with the R&S
SGS100A Web-GUI", on page 41.
● "Diagnostics"
– "SCPI Remote Trace" records messages exchanged via the remote control
interface, see Chapter 12.6.3.4, "SCPI remote trace", on page 206.
● "Help"
– "Glossary" explains terms related to the LXI standard.
– www.rohde-schwarz.com opens the Rohde & Schwarz home page.
12.6.3 LAN configuration
The "LAN Configuration" web page displays all mandatory LAN parameters and allows
their modification.
LXI configuration
To Next Page
Loading...
