General instrument settings and instrument setup
R&S
®
SGS100A
144User Manual 1173.9105.02 ─ 13
10.2 Hardware configuration
Querying information about the installed assemblies
► Select "SGMA-GUI > Instrument Name > Setup > Hardware Config".
In the "Hardware Config" dialog, the installed assemblies together with their var-
iants and revision states can be displayed for servicing purposes.
The dialog is a table that lists the installed assemblies. It is divided into the sec-
tions:
● "Common Assembly"
● "RF Assembly"
Settings
Assembly.....................................................................................................................144
Assembly
The tables list the installed assemblies.
"Assembly"
Name of the assembly
"Part Number"
Part number of the assembly
"Serial Number"
Serial number of the assembly
"Revision"
Revision state of assembly
Hardware configuration
To Next Page
Loading...
