Rohde & Schwarz R&S SGS100A - System:ninformation; System:reboot; System:restart; System:shutdown

Remote control commands
R&S
®
SGS100A
297User Manual 1173.9105.02 ─ 13
Example:
SYSTem:COMMunicate:USB:RESource?
queries the VISA resource string for remote control via the USB
interface.
Response: "USB::72::000000::INSTR"
Usage: Query only
Manual operation: See "Visa Resource Strings" on page 154
:SYSTem:NINFormation?
Queries the oldest information message ("Error History > Level > Info") in the error/
event queue.
Return values:
<NextInfo> string
Example:
:SYSTem:NINFormation?
Queries the oldest entry in the info message queue.
Response: 90,"Info;=== Instrument startup...
==="
Information message containing error number 90, that states,
that the instrument startup is complete.
Usage: Query only
:SYSTem:REBoot
Restarts the firmware and the operating system.
Usage:
Event
:SYSTem:RESTart
Restarts the firmware. The operating system remains active.
Usage:
Event
:SYSTem:SHUTdown
Shuts down the instrument.
Usage:
Event
:SYSTem:STARtup:COMPlete?
Queries if the startup of the instrument is completed.
Return values:
<Complete> 0 | 1 | OFF | ON
*RST: 0
SYSTem subsystem