Rohde & Schwarz R&S SGS100A - System:communicate:pciexpress:resource; System:communicate:socket:port; System:communicate:socket:resource; System:communicate:usb:resource

Remote control commands
R&S
®
SGS100A
296User Manual 1173.9105.02 ─ 13
Example:
SYSTem:COMMunicate:HISLip:RESource?
Response: "TCPIP::192.1.2.3::hislip0::INSTR"
Usage: Query only
Manual operation: See "Visa Resource Strings" on page 154
:SYSTem:COMMunicate:PCIexpress:RESource?
Queries the visa resource string for remote control via the PCIe interface.
Return values:
<Resource> string
Usage: Query only
Manual operation: See "Visa Resource Strings" on page 154
:SYSTem:COMMunicate:SOCKet:PORT <ScpiEthPort>
Sets the port number for remote control via socket communication.
Parameters:
<ScpiEthPort> integer
Range: 1000 to 65535
*RST: n.a. (factory preset: 5025)
Example:
SYSTem:COMMunicate:SOCKet:PORT 5030
// specifies the socket port number.
Manual operation: See "SCPI Port" on page 69
:SYSTem:COMMunicate:SOCKet:RESource?
Queries the VISA resource string for remote control via LAN interface, using TCP/IP
socket protocol.
Return values:
<Resource> string
Example:
SYSTem:COMMunicate:SOCKet:RESource?
Response: "TCPIP::10.113.1.150::5025::SOCKET"
Usage: Query only
Manual operation: See "Visa Resource Strings" on page 154
:SYSTem:COMMunicate:USB:RESource?
Queries the VISA resource string for remote control via the USB interface.
Return values:
<Resource> string
SYSTem subsystem