Rohde & Schwarz R&S SGS100A - R&S Sgma-Gui Commands; Instruments:active[:State]

Understanding the R&S SGMA-GUI software
R&S
®
SGS100A
85User Manual 1173.9105.02 ─ 13
// Enable exclusive access for the selected instrument.
INSTruments:EACCess:STATe?
// Response: 0,0,0
INSTruments:EACCess:STATe ON,OFF,OFF
// Locks the first instrument.
Example: Configuring SGMA instruments
// Clear the device list and add new instruments manually.
INSTruments:CLEar
INSTruments:NAME "MYSGT100A","MYSGS100A","MYSGU100A"
// Define the instrument types.
INSTruments:TYPE "SGT","SGS"
// Specify the remote interface and name or address for the instruments in the
// device list.
INSTruments:REMote:CHANnel LAN,USB,GPIB
INSTruments:REMote:NAME "10.124.1.247","RSSGS100A1000025",
INSTruments:USB:SERial 0,0,100025
INSTruments:GPIB:ADDRess 0,0,28
INSTruments:GPIB:BOARd 0,0,0
8.5.2 R&S SGMA-GUI commands
This section comprises the SCPI commands provided for remote control of the R&S
SGMA-GUI software.
:INSTruments:ACTive[:STATe]...........................................................................................85
:INSTruments:CLEar........................................................................................................ 86
:INSTruments:COUNt?..................................................................................................... 86
:INSTruments:EACCess[:STATe]........................................................................................86
:INSTruments:GPIB:ADDRess...........................................................................................87
:INSTruments:GPIB:BOARd..............................................................................................87
:INSTruments:MAPPing:FILE............................................................................................ 87
:INSTruments:NAME........................................................................................................ 87
:INSTruments:REMote:CHANnel....................................................................................... 87
:INSTruments:REMote:NAME............................................................................................88
:INSTruments:SCAN........................................................................................................ 88
:INSTruments:SCAN:HNPRefix......................................................................................... 88
:INSTruments:SCAN:SNET:IPADdress............................................................................... 88
:INSTruments:SCAN:SNET:PLENgth................................................................................. 89
:INSTruments:SCAN:SNET[:STATe]...................................................................................89
:INSTruments:SERial........................................................................................................89
:INSTruments:TYPE......................................................................................................... 90
:INSTruments:ACTive[:STATe] <State>
Enables/disables the instrument for the R&S SGMA-GUI. The main panel of this soft-
ware displays only activated instruments.
Remote control of R&S SGMA-GUI