Rohde & Schwarz R&S SGS100A - Managing Messages in the Info Dialog

Understanding the R&S SGMA-GUI software
R&S
®
SGS100A
82User Manual 1173.9105.02 ─ 13
2. Select "Device Identify" to trigger identification.
The green [LAN] LED on the front panel of the instrument blinks.
8.4.5 Managing messages in the info dialog
How to get additional information on the message
► In the "Info" dialog, click a message to select it.
In the lower section of the dialog, additional information on the highlighted mes-
sage is displayed.
How to display all messages
► In the "Info" dialog, click the "History" key.
A history of all messages that have occurred since the R&S SGMA-GUI software
was started is listed in the upper dialog pane. The most recent message is dis-
played first.
How to delete an error message
1. In the "Info" dialog, select the highlighted message and
2. Click the "Delete" key.
Tip: This key is available only when the history of the messages is displayed.
The highlighted message is cleared.
How to delete all error messages
► In the "Info" dialog, click the "Delete All" key.
Tip: This key is available only when the history of the messages is displayed.
All messages are cleared.
How to delete all brief messages
► In the "Info" dialog, click the "Del. volatile" key.
Tip: This key is available only when the history of the messages is displayed.
All brief messages are cleared.
How to call the history
1. In the "Info" dialog, click the "History" key.
Working with R&S SGMA-GUI