Rohde & Schwarz R&S SGS100A - Transporting

Transporting
R&S
®
SGS100A
313User Manual 1173.9105.02 ─ 13
15 Transporting
Lifting and carrying
See:
●
"Lifting and carrying the product" on page 11
●
Chapter 3.1, "Lifting and carrying", on page 19.
Packing
Use the original packaging material. It consists of antistatic wrap for electrostatic pro-
tection and packing material designed for the product.
If you do not have the original packaging, use similar materials that provide the same
level of protection.
Securing
When moving the R&S SGS in a vehicle or using transporting equipment, make sure
that the R&S SGS is properly secured. Only use items intended for securing objects.
Transport altitude
Unless otherwise specified in the data sheet, the maximum transport altitude without
pressure compensation is 4500 m above sea level.