Rohde & Schwarz R&S SGS100A - Filling the Correction List Automatically

Signal generator settings
R&S
®
SGS100A
109User Manual 1173.9105.02 ─ 13
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
on page 266
Column Separator
Selects the separator between the frequency and level column of the ASCII table, that
the user correction list is exported to or imported from.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 266
Select ASCII Source/Destination
Calls the "File Manager" for selecting the ASCII file to be imported into a user correc-
tion list (source) or the ASCII file the user correction list is exported (destination) in.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect on page 265
Select Destination/Source
Calls the "File Manager" for selecting the user correction list to be exported (source)
into an ASCII file or the destination for the ASCII file to be imported (destination) in.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:SELect on page 268
Import/Export
Starts the export or import of the selected file.
When import is selected, the ASCII file is imported as user correction list.
When export is selected, the user correction list is exported into the selected ASCII file.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:EXECute on page 267
9.5.6 Filling the correction list automatically
The "Fill Table" menu enables you to set the level correction values automatically.
Level and power-on settings