Understanding the R&S SGMA-GUI software
R&S
®
SGS100A
60User Manual 1173.9105.02 ─ 13
Table 8-1: Content of the operating menu
File Setup Help
New
Instruments About
Open
Software Contents
Save Reset SGMA-GUI Index
Save as
Protection
Exit Remote
Shut down instruments and exit
8.1.1 File menu
The R&S SGMA-GUI employs the standard Save/Recall file management function and
allows you to save and reload settings in/to a file with a user-defined name and loca-
tion (see also Chapter 8.4.1, "Saving and loading settings", on page 75).
In the following, the "File" menu of the R&S SGMA-GUI is described in detail. It incor-
porates standard functions.
New
Resets R&S SGMA-GUI and all connected instruments to their preset settings.
Open
Opens the standard file open browser for loading a saved R&S SGMA-GUI file
(*.savrcl). The file contains the user-specific settings of a session, such as instru-
ments configured in the software. The complete settings of a session can be saved
and loaded.
Only files of this type are selectable.
Note: Instrument-specific settings, e.g. frequency and level settings, are saved locally
on the particular instrument itself. These instruments settings are saved automatically
in a predefined directory and loaded by default when starting the instrument again.
The files with instrument settings are not accessible.
Save
Standard quick save of the settings of the current session if a filename previously has
been applied. If not, the "Save As" dialog is opened.
Save as
Opens the standard file save browser for saving the settings of the current session.
R&S SGMA-GUI files have the file extension .savrcl so the name typed in is equip-
ped with this extension. The complete settings of a session are saved.
Exit
Quits the R&S SGMA-GUI. The current settings of the instrument's session are saved
and loaded by default when starting the software again.
Note: The instruments configured in the R&S SGMA-GUI are not shut down.
Operating menu and toolbar
To Next Page
Loading...
