Rohde & Schwarz R&S SGS100A - Page 67

Understanding the R&S SGMA-GUI software
R&S
®
SGS100A
67User Manual 1173.9105.02 ─ 13
Board Number
Identifies the GPIB bus card of the controller to that the adapter is connected.
See also Chapter 12.1.5, "GPIB interface (IEC/IEEE bus interface)", on page 183.
Remote command:
:INSTruments:GPIB:BOARd on page 87
Serial Number
Enters the serial number as instrument's identification while using the USB or PCIe
interfaces for remote control.
Remote command:
:INSTruments:SERial on page 89
Ok
Confirms the settings and closes the dialog.
Apply
Confirms the settings.
Cancel
Discards settings and closes the dialog.
8.1.2.3 Software
Querying information about the installed options and software version
► Select "Setup > Software".
The "Versions / Options" info dialog opens, showing program information.
Software
Displays information on:
"Package"
Installed software packages.
"Version"
Release of the software package.
Operating menu and toolbar