Rohde & Schwarz R&S SGS100A - Understanding the R&S SGMA-GUI Software; Operating Menu and Toolbar

Understanding the R&S SGMA-GUI software
R&S
®
SGS100A
59User Manual 1173.9105.02 ─ 13
8 Understanding the R&S SGMA-GUI soft-
ware
This section gives a detailed description of the R&S SGMA-GUI user interface and
information on how to work with it. The main panel with the overview of the configured
instruments is the operating and control interface for the whole program. From here, all
program functions are accessible. This panel is displayed after the start of R&S SGMA-
GUI. The software always loads the previously used settings, so you can continue your
work in the next session.
● Operating menu and toolbar................................................................................... 59
● Info dialog and messages in the info bar................................................................ 69
● Main panel...............................................................................................................72
● Working with R&S SGMA-GUI................................................................................75
● Remote control of R&S SGMA-GUI........................................................................ 83
8.1 Operating menu and toolbar
On the top of the main panel, there is the menu bar, the toolbar and the info bar with
the corresponding "Info" key. Some of the functions are accessible via the toolbar with
its icons below the menu selection line.
The dialogs are built using elements, e.g., selection lists, checkboxes, and entry fields.
A blue frame indicates that the selected item is active. In a highlighted element, entries
can be made.
Operating menu and toolbar