Safran CORTEX CRT Quantum - 1.6. Performance Specifications; 3.1. Monitoring and Control

COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec. 03, 2021Sept.
30, 2021
© Safran Data Systems
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page xix
SYMBOLS DESCRIPTION
The following symbols appear in this document and on the chassis:
ISO 7000-0434B
(2004-01)
Caution: The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
IEC 60417-6042
(2010-11)
Caution, risk of electric shock: The lightning flash with an arrowhead
symbol within an equilateral triangle, is intended to alert the user to the
presence of uninsulated ‘dangerous voltage’ within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
IEC 60417-5019
(2006-08)
Protective earth; protective ground: terminal is intended for connection to
an external conductor for protection against electric shock in case of a fault.
IEC 60417-5007
(2009-02)
"ON" (power): indicate connection to the mains.
IEC 60417-5008
(2009-02)
"OFF" (power): indicate disconnection from the mains.
IEC 60417-5032
(2002-10)
Alternating current: the equipment is suitable for alternating current only.
Altitude: Do not use at an altitude exceeding 2000m.
Tropical conditions: This product is not suitable for tropical conditions.
Documentation must be consulted in all cases where this symbol is marked.