Safran CORTEX CRT Quantum - Figure 7: Tcp-Ip Interfaces

COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec. 03, 2021Sept.
30, 2021
© Safran Data Systems
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 43
Next figure illustrates the data flows between CORTEX CRT Quantum software components and between the
CORTEX CRT Quantum and the external world:
M&C SOFTWARE
SIGNAL PROCESSING
SOFTWARE
Monitoring Data (COP-MON)
Telecommand Data (COP-TC) - Segment Level
Control Data (COP-CTRL)
COP SOFTWARE
Ranging Data (RNG)
Telecommand Data (TC) - CLTU Level
Telemetry Data (TM)
Simulation Data # 1 (SIM-2)
Logging Data (LOG)
Simulation Data # 1 (SIM-1)
Reset Commands (RST)
Spectrum Analysis Data (SPA)
Control Data (CTRL)
Monitoring Data (MON)
Ranging Data (MEAS)
CLIENTS
CLIENTS
REMOTE CLIENTS (SCC, ...)
Single-client Connections
Multi-client Connections
3100
3101
3120
DATA SERVER
3050
3001
3000
3034
3070
3020
3002
3040
3021
3022
3035
Doppler or Analysis Data (DOP)
3060
FMRT Telemetry Data (FMRT)
3041
DATA SERVER
3065
Doppler Compensation (DOPC)
Figure 7: TCP-IP Interfaces