COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
5.1.3.3. Wait after power off
It is recommended to wait for at least one minute to re-power on the chassis after power off.
5.1.3.4. Cpu Load Considerations
SAFRAN DATA SYSTEMS DOES NOT WARRANTY CORTEX CRT QUANTUM PERFORMANCES
IF ADDITIONAL SOFWARE ARE LOADED / EXECUTED ON THE MACHINE.
5.1.3.5. Software Loading
Avoid using floppy disks from unidentified sources. Presence of virus may severely affect the performances of
the equipment or crash the software.
To Next Page
Loading...