EasyManua.ls Logo

Safran CORTEX CRT Quantum - SPS Version Identification; Common Data

Safran CORTEX CRT Quantum
346 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
© Safran Data Systems
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 234
4.2.5. SPS Version Identification
4.2.5.1. Common Data
Software version at delivery is described in Annex 5 (Section 1) and, with more detail, in the CORTEX
Acceptance Test Report.
To know the version of the PROMed software (SAFRAN DATA SYSTEMS electronic cards), refer to the
Acceptance Test Report (see also the marking on the PROM chips).
To know the Signal Processing Software (SPS) version and what version of software is downloaded at
boot to the SAFRAN DATA SYSTEMS electronic cards, click on at the lower right corner of the
display and select About Cortex:
Figure 99: About CORTEX CRT Quantum SPS : Software Version
The SPS is built around an SPS kernel (supporting multiple CORTEX products such as the CORTEX CRT,
CORTEX HDR, CORTEX ACS, CORTEX RTR, etc…) and a product-specific SPS software layer.
The header of the above window shows the version of the SPS kernel (example: Version 2.4).

Table of Contents