COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
To change the file name and access path of the status to log for the 1st additional flow:
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\IN-SNEC\Cortex Station\SetDefault\Log\10
Keyword: FileConfig
Default setting at delivery: D:\ZDS\Data\SPS\Logging\Menu1\LogFlow10.txt
4.2.7.7.3. PC Clock Synchronization to IRIG Time
Allows the PC time to be synchronized to IRIG-B time.
Note: the unit must be set as Time zone GMT, no daylight saving time.
To enable/disable the plug-in IRIG B / Auto leap year feature:
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-Snec\CortexCRT\SetDefault\Preferences\Irig
Keyword: Enable
Default setting at delivery: 0 (inactive)
Enter 0 (inactive) or 1 (active).
To enable/disable the IRIG update of the PC clock:
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-Snec\CortexCRT\SetDefault\Preferences\Irig
Keyword: IrigUpdate
Default setting at delivery: 0 (inactive)
Enter 0 (inactive) or 1 (active).
To enable/disable the automatic leap year update:
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-Snec\CortexCRT\SetDefault\Preferences\Irig
Keyword: AutoLeapYear
Default setting at delivery: 0 (inactive)
Enter 0 (inactive) or 1 (active).
When AutoLeapYear is activated, the leap year setup does not need to be managed through Global CORTEX
CRT Table. It is automatically managed by the SPS by checking the current year in the Windows Clock.
To enable/disable NTP time update at the start:
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-Snec\CortexCRT\SetDefault\Preferences\Irig
Keyword: UseNTP
Default setting at delivery: Not set (default value = 1)
Enter 0 (inactive) or 1 (active).
To Next Page
Loading...