Safran CORTEX CRT Quantum - UDP Telemetry Data

COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
© Safran Data Systems
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 253
4.2.7.10.UDP Telemetry Data
To change the UDP server port number:
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault\Preferences\UdpTm
Keyword: PortTm
Default setting at delivery: 3075
Enter 0 to disable the UDP service.
To change the Multicast IP Address:
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault\Preferences\UdpTm
Keyword: MultiAddr
Default setting at delivery: "227.11.13.17"
Enter any valid and unused Multicast address. Address range: 224.0.0.0 through 239.255.255.255.
To change the Multicast TMU Base address:
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault\Preferences\UdpTm
Keyword: MultiPort
Default setting at delivery: 10000
With default definition for Multicast IP and port:
TMU-A frames are provided to 127.11.13.17::10000
TMU-B frames are provided to 127.11.13.17::10001
…etc…