Safran CORTEX CRT Quantum - Video Signal Output (NT Compatibility); Telemetry Processing; Telemetry Buffers in RAM; Telemetry Data Storage on the Disk

COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
© Safran Data Systems
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 241
4.2.7.2.7. Video Signal Output (NT Compatibility)
Allows Video Output compatibility with the Cortex NT unit
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault\Preferences\Ifrx
(x=1 to 5)
Keyword: CompatibleNT
Default setting at delivery: 0
Enter 0 for XL mode, 1 for Coherent AM demodulation upon PM selection (NT compatibility), 10h for band-limited
Video output (NT compatibility)
4.2.7.3. Telemetry Processing
4.2.7.3.1. Telemetry Buffers in RAM
To modify the size of the TM buffer in RAM, used in TM frame history from TCP-IP
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault\SignalProcessing\Tmux
(x = TM chain number)
Keyword: BufferNbr
Default setting at delivery: 256 (frames/blocks)
Enter a number between 4 and 1024 (in decimal) or between 4 and 400 in hexadecimal. The size is expressed in
number of frames or blocks
4.2.7.3.2. Telemetry Data Storage on the Disk
Telemetry frames can be stored on the disk for further replay or transfer over the LAN. Important: prior changing
these values, check free space on the hard disk (using Windows Explorer)
To change the file name and access path:
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault\Preferences\Tmux
(x = TM chain number)
Keyword: FileDir
Default setting at delivery: D:\ZDS\Data \Storage\Menu1\\Tmui\Ftmu
Change the file name and access path (extension 1 to N will be automatically appended to the selected name)
To change the number of files:
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault\Preferences\Tmux
(x = TM chain number)
Keyword: StorageNumb
Default setting at delivery: 8 (files)
To change the file size:
Registry path: HKEY_LOCAL_MACHINE\SOFTWARE\In-snec\CortexCRT\SetDefault\Preferences\Tmux
(x = TM chain number)
Keyword: StorageSize
Default setting at delivery: 32768 (bytes)