Safran CORTEX CRT Quantum - Page 310

COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
© Safran Data Systems
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 230
REMOTE USERS
CORTEX SPS
Start ApplicatiStart ApplicationStart Application
Set CTX Document ID status to 0
Set Update CTX Document status to 0
Last Active CTX Document
(Disk)
Load CTX Document in RAM
CTX Document # N
(disk)
CTX Document Name Table
(Disk)
Accept
Store CTX Document #N with Label
Set CTX Document ID status to N.
Set Update CTX Document status to 0.
Update label to CTX Document #N
in CTX Document Name Table
Accept
Configuration Request
Saved
Set Update CTX Document status to 1
Accept
Load CTX Document #N
Load CTX Document #N to Active CTX Table (*)
Loaded
Set CTX Document ID status to N.
Set Update CTX Document status to 0
Apply all configuration parameters
(*) If file error: set all parameters
to their default value
Saved
Every 10 seconds : save Active CTX Table to the disk
Save CTX Document Name Table
Save Active CTX Table to CTX Document # N
Loaded
Load CTX Document Name Table
Saved
Loaded
Figure 97: CTX Document Management