Safran CORTEX CRT Quantum - Page 316

COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
© Safran Data Systems
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 236
The CORTEX CRT Quantum Datas can be found in the following directories. Theses directories can be changed
but the path must be configured in registry (see below):
ACCESS PATH
DESCRIPTION
D:\ZDS\Data
Root directory
D:\ZDS\Data\
The ASCII-coded upgrade.txt file gives the
current CORTEX software configuration (SPS,
MCS, etc…)
D:\ZDS\Data\CRT
CRT Signal Processing Software : other files
CrtConfig_i.CTX
D:\ZDS\Data\CRT
\Filter
IF filters coefficients files
D:\ZDS\Data\CRT
\CTXDocument<
i>
« CTX Document Name » Table and
« CTX Document » files
D:\ZDS\Data\CRT
\Tms1 &
\Tms2
Simulated telemetry files (TMS in FILE mode)
D:\ZDS\Data\MCS
CRT Graphical Software : other files
CrtConfig_i.MCS
D:\ZDS\Data\MCS
\DBase
TC Data Base
D:\ZDS\Data\Storage
\
<\Menui
>
\Log
Logging data storage area (default setting)
D:\ZDS\Data
\Storage\
<\Menui
>
\Log
Range data storage area (default setting)
D:\ZDS\Data
\Storage\
<\Menui
>
\Tmui
Telemetry storage area (default setting)
D:\ZDS\Data
\Storage\
<\Menui
>
\Doppler
Doppler compensation files
D:\ZDS\Data\COP
Command Operation Procedure software (COP).
Optional