COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec. 03, 2021Sept.
30, 2021
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
1.4.3.7. CORTEX Configuration at Delivery
The CORTEX CRT Quantum is supplied with the hardware components and software licenses (number of
telemetry chains, TM bit rate, decoding capability, commanding and ranging capability, etc…) covering the
Customer requirements. The configuration of the CORTEX at delivery (hardware components & licenses) is
saved to a Flash Memory chip on the MSP module.
WARNING:
SWAPPING OF THE MSP MODULE FROM CORTEX A TO CORTEX B IS NOT ALLOWED IF CORTEX B IS MORE
PERFORMING THAN CORTEX A (SUPPORTS LICENSES WHICH ARE NOT IMPLEMENTED IN CORTEX A).
A detailed description of the CORTEX configuration at delivery is provided in Annex 5 of the User Manual and in
the Factory Acceptance Test report (document reference: CRE100047).
1.4.3.8. Software Version
Software version at delivery is described in Annex 5 of the User Manual, in the Factory Acceptance Test Report.
To Next Page
Loading...