Safran CORTEX CRT Quantum - Page 61

COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec. 03, 2021Sept.
30, 2021
© Safran Data Systems
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 36
1.6.10.3.Synthesizer Specifications
 RF phase noise Guaranteed values
 - 70dBc/Hz @ 100 Hz / - 90dBc/Hz @ 1 KHz / - 95dBc/Hz @ 10 kHz /
 - 95dBc/Hz @ 100 kHz / - 110dBc/Hz @ 1 MHz
 Typical value
 - 80dBc/Hz @ 100 Hz / - 95dBc/Hz @ 1 KHz / - 100dBc/Hz @ 10 kHz /
 - 100dBc/Hz @ 100 kHz / - 120dBc/Hz @ 1 MHz
 Frequency Tuning < 0.1 µHz with CRT or 5 Mhz steps alone
1.6.11. Mechanical – Environment
 Industrial PC chassis Height: 4 rack spaces for 4U chassis or 2 rack spaces for 2U chassis
 Width : 19 inches
 Depth : 550 mm for 4U chassis or 500mm for 2U chassis
 Weight ≈ 25 kg (configuration dependent)
 Built-in ventilation unit
 Operating temperature + 10 °C to + 40 °C
 Storage temperature - 20 °C to + 60 °C
 Relative humidity 40 % to 95 % non-condensing
 Temperature alarms Front panel LED (model dependent) & TCP-IP status
 Front panel color RAL 5023
1.6.12. Supply
 Power Supply Voltage 100 - 240 VAC (-10%, +6%)
 Frequency 50 / 60 Hz
 Nominal consumption 3.3 A – 1.4 A
 Maximum consumption 9.0 A – 4.5 A
 Redundant power supply