EasyManua.ls Logo

SATO S84NX - Page 11

SATO S84NX
588 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Always ground the
connections
Always connect the product's ground wire to a ground. Not grounding
the ground wire could result in electric shock. Also, product
operations could be affected by interference from electrical noise.
Do not use the product
when something is
abnormal
Do not use the product if any abnormality such as smoke or an
unusual odor is detected. Doing so could result in a fire or electric
shock. Immediately power off the product, unplug the power cord
from the outlet, and contact your SATO reseller or technical support
for repairs.
Do not place
containers holding
water or other liquid
near the product
Do not place flower vases, cups, or other containers holding liquids,
such as water or chemicals, near the product. If water or chemicals
get inside the product, immediately power it off, and contact your
SATO reseller or technical support. Using the product in this condition
could result in a fire or electric shock.
Do not drop the
product in water
Do not use the product near a container holding liquid. If the product
is dropped into water, immediately power it off, and contact your
SATO reseller or technical support. Using the product in this condition
could result in a fire or electric shock.
Do not put objects
inside the product
Do not insert or drop any metal or flammable objects down the
opening (cable port, etc.) of the product. If a foreign object gets inside
the product, immediately power it off, unplug the power cord from the
outlet, and contact your SATO reseller or technical support. Using the
product in this condition could result in a fire or electric shock.
Connecting cables or
optional devices
When connecting a cable or optional device to the product, be sure
to turn off each of the devices. If they are connected with the power
on, an optional device could move unexpectedly, resulting in injury,
electric shock, or damage.
When installing a cable or optional device, be sure not to make a
mistake in the orientation and steps to install. Otherwise, it could
result in injury, fire, electric shock, or damage.
Do not use cables other than the ones supplied with the product or
recommended by us. Doing so could result in smoke, fire, electric
shock, or damage.
Do not operate with
wet hands
Do not power on/power off the product or plug/unplug the power cord
and other cables with wet hands. Doing so could result in electric
shock or damage.
Do not disassemble or modify the product. Doing so could result in a
fire or electric shock. Ask your SATO reseller or technical support to
conduct internal inspections, adjustments, and repairs.

Table of Contents

Other manuals for SATO S84NX