Safety Precautions
12
Do not disassemble
the product
Using the cleaning
fluid
• Do not use cleaning fluids other than the ones supplied with the
product or recommended by us.
• The cleaning fluid is to be strictly kept away from the fire. Never apply
heat or place it in the fire.
• Keep the fluid out of reach of children to prevent them from
accidentally drinking it. If a child accidentally drinks the fluid,
immediately consult with a physician.
Do not place the
product in areas with
high humidity
• Do not place this product in an area with high humidity or where
condensation occurs. If condensation has occurred, immediately
power off the product, and avoid using it until it is dried. Using the
product while condensation is on it could result in a fire, electric
shock, or damage.
Power cord and other
cables
• Grab a power cord and other cables by the plug when removing from
the outlet or connector port. Removing a power cord and other cables
by grabbing the cord/cable area could result in exposure of wires,
breakage, fire, electric shock, or damage.
• Do not place the power cord and other cables near a heater or other
sources of heat. Doing so could result in melting of the power cord
and other cables sheathing, fire, electric shock, or damage.
Loading media roll
• When loading a media roll, be careful not to get your fingers trapped
between the media roll and the supply spindle.
Print head
• The print head is hot after printing. Be careful not to get burned when
replacing media or cleaning immediately after printing.
• Do not touch the print head with your bare hands. Doing so could
result in injury or damage.
• To replace the print head, follow the procedure in the Operator
Manual. If the Operator Manual does not contain this procedure,
avoid trying to replace it on your own terms, and contact your SATO
reseller or technical support.
• When opening and closing the print head, make sure that objects
other than media do not get caught. Otherwise, it could result in injury
or damage.
• When opening and closing the cover, be careful not to get your
fingers trapped in between. Also, firmly hold the cover to prevent it
from closing unexpectedly.