SATO S84NX - Page 159

159
Standard/Left-Hand Type Opposite/Right-Hand Type
(1) Feed direction (1) Feed direction
The setting range varies depending on the print resolution of the product.
The setting range is as follows:
Resolution S84NX S86NX
203 dpi (1 dot = 0.125 mm
(0.0049"))
-19999 to 0 to 19999 dots -19999 to 0 to 19999 dots
305 dpi (1 dot = 0.083 mm
(0.0033"))
-17999 to 0 to 17999 dots -17999 to 0 to 17999 dots
609 dpi (1 dot = 0.042 mm
(0.0017"))
-9599 to 0 to 9599 dots -
Horizontal
Set the print position in the horizontal direction.
Set the correction value from the print position when facing the product as "-" to adjust to the back
side and "+" to adjust to the front side.
Standard/Left-Hand Type Opposite/Right-Hand Type