SATO S84NX - Page 174

[Advanced]
174
Enabled
The updated calendar data is included in the reprint data.
Disabled
Print exactly the same data as the last print job.
[Day of Week Code]
Set the day of the week code for the calendar command.
The setting items are as follows:
[Sunday] to [Saturday]
Assign characters to each day of the week.
The setting range is from 0 to 9, A to Z, and a to z.
[Month Code]
Set the month code for the calendar command.
The setting items are as follows:
[January] to [December]
Assign characters to each month.
The setting range is from A to Z, and a to z.
[Case Format]
Select the character format for the calendar.
The options are as follows:
Mixed
Use upper case for the first character only.
Example: Sunday/Sun
Upper
Use upper case for all characters.
Example: SUNDAY/SUN
[Calendar Check]
Set whether to judge if the time acquired from the battery for the calendar is correct.
By selecting [Enabled], a calendar error occurs when time is judged to be incorrect, such as due to a
dead battery, etc.
The options are as follows:
Enabled
Enable the calendar check function.
Disabled
Disable the calendar check function.