[Network]
188
• To set the password, [Server] should be set.
[Exclude]
Set names, IP addresses or domains for the proxy to exclude.
• Exclude must contain at least 127.0.0.1 and localhost.
[DHCP Options]
Configure the DHCP options for Wi-Fi.
[DHCP Options] can be set only if you have selected [DHCP] in the [IPv4] > [Mode] menu or [IPv6] >
[Mode] menu.
The setting items are as follows:
[Update DNS (Option 81)]
Enable or disable the use of DHCP server option 81.
The options are as follows:
Enabled
Enable the use of DHCP server option 81.
Disabled
Disable the use of DHCP server option 81.
[Hostname]
Set the hostname.
You can enter 0 to 255 characters. Alphabets (capital and small letters), numbers and symbols can be
used.
• Some symbols cannot be used. If you enter a symbol that cannot be used, [Invalid
value] appears on the screen.
• Periods can be input only as delimiter text.
• If left blank, the setting is disabled.
[Wi-Fi Protected Setup]
Set the wireless LAN connection using the push button or PIN code method.
• Refer to the manual of the access point device for its operation.
• This screen does not appear if [LAN] or [Wi-Fi Direct] is active.
The setting items are as follows:
[Button (PBC)]
Set the wireless LAN connection using the push button method.
To Next Page
Loading...