191
• [Ad-hoc]
[Channel]
Set the communication channel.
[Channel] can be set only if you have selected [Ad-hoc] in the [Mode] menu.
The number of channels you can set varies depending on the region of the product.
[Security]
Set the security method of the network. Set the security methods so that the product, host and network
devices match.
The options are as follows:
• [None]
• [WEP]
• [WPA2/WPA]
• [WPA2]
• [Dynamic WEP]
If you have selected [Ad-hoc] in the [Mode] menu, only [None] and [WEP] will be available.
[WEP Conf.]
Set the WEP key.
Appears if you have selected [WEP] in the [Security] menu.
The setting items are as follows:
[Authentication]
Set the WEP authentication method.
The options are as follows:
• [Open System]
• [Shared Key]
[Key Index]
Set the key index.
Set the key index (WEP key) according to the access point of the wireless LAN you connect.
The setting range is from 1 to 4.
• Depending on the connecting device, the range of the key index may be 0 to 3. In such
a case, if you have set the product to 1, set the connecting device to 0.
[Key #1] to [Key #4]
Set the WEP key #1 - key #4.
You can enter alphabets (capital and small letters) and numbers.
Depending on the length of the WEP key, the number of characters you can set is as follows:
• When the key length is 64 bits
ASCII: Five characters
Hexadecimal: 10 characters
To Next Page
Loading...