SATO S84NX - Page 192

[Network]
192
• When the key length is 128 bits
ASCII: Thirteen characters
Hexadecimal: 26 characters
[WPA Conf.]
Set the WPA authentication.
Appears only if you have selected [WPA2/WPA] or [WPA2] in the [Security] menu.
The setting items are as follows:
[WPA Authentication]
Set the WPA authentication method.
The options are as follows:
• [Personal (PSK)]
• [Enterprise (802.1x)]
• [CCKM]
[PSK]
Set the PSK shared key.
Appears only if you have selected [Personal (PSK)] in the [WPA Authentication] menu.
You can enter 8 to 63 ASCll characters or 64 hexadecimal digits. Alphabets, numbers and symbols
can be used.
[EAP Conf.]
Set the functions for EAP.
Appears only if you have selected items other than [Personal (PSK)] in the [WPA Authentication] menu
or if you have selected [Dynamic WEP] in the [Security] menu.
The setting items are as follows:
[EAP Mode]
Set the EAP Mode (authentication mode).
The options are as follows:
• [FAST]
• [LEAP]
• [PEAP]
• [TLS]
• [TTLS]
[Inner Method]
Set the inner method.
Appears only if you have selected [FAST], [PEAP], or [TTLS] in the [EAP Mode] menu.
• If you have selected [FAST] in the [EAP Mode] menu, the option is [AUTO] only.
• If you have selected [PEAP] in the [EAP Mode] menu, the option is [MSCHAPv2] only.