[Network]
194
Appears only if you have selected [FAST] in the [EAP Mode] menu and if you have selected [Disabled]
in [PAC Auto Provisioning].
You can enter 0 to 64 characters. Alphabets, numbers and symbols can be used.
[Interface]
Select the network interface.
This item is to select the network interface from LAN or wireless LAN when you have installed the
optional wireless LAN.
The options are as follows:
Auto
Automatically select between LAN and wireless LAN interface at product startup. LAN is selected
if LAN cable is connected to a link-established hub (Link LED is flashing) at product startup.
Wireless LAN is selected if LAN is not detected at product startup.
LAN
Use LAN interface (or force LAN interface).
Wi-Fi
Use wireless LAN interface (or force wireless LAN interface).
◦ Appears only if you have installed the optional wireless LAN.
• A message prompting you to restart the product will appear on the Online/Offline
screen if you have made any changes. In such a case, reboot the product to apply the
settings.
[Services]
Set the TCP/IP port number, NTP, LPD, FTP, SNMP, or SOS (SATO Online Services).
The setting items are as follows:
[Ports]
Set the TCP/IP port number.
The setting items are as follows:
Roles of Port1 to Port3
In the socket server function of TCP/IP, either of the following connection methods can be used.
The ports to be used and their roles change depending on the connection method and communication
protocol.
Two-port connection
Port1 is used for receiving print data, and Port2 is used for returning the product status.
To Next Page
Loading...