195
Two-port connection is available when the communication protocol is Status4.
One-port connection
One port is used for both receiving print data and returning the product status.
When the communication protocol is Status4, Port3 is used.
When the communication protocol is Status3 or Status5, Port1 or Port3 is used.
[Port1]
Set the port number of Port1.
For the two-port connection of Status4, this port is used for receiving print data. For the one-port
connection of Status3/Status5, this port is used for both receiving print data and returning the product
status.
The setting range is from 1 to 65535.
• Each port (1, 2 and 3) must be set to different values.
• Set a port number not used by other services. If port numbers that overlap with those
used by other services are used, communication cannot be performed properly.
[Port2]
Set the port number of Port2.
For the two-port connection of Status4, this port is used for returning the product status.
The setting range is from 1 to 65535.
• Each port (1, 2 and 3) must be set to different values.
• Set a port number not used by other services. If port numbers that overlap with those
used by other services are used, communication cannot be performed properly.
To Next Page
Loading...