SATO S84NX - Page 202

[Network]
202
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: rouser
[User Security]
Set the read-only security level.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
The options are as follows:
• [None]
• [Authentication]
• [Privacy]
[Authentication Protocol]
Set the authentication protocol.
Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
The options are as follows:
• [MD5]
• [SHA]
[Authentication Passphrase]
Set the authentication passphrase.
Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Privacy Protocol]
Set the privacy protocol.
Appears only if you have selected [Privacy] in the [User Security] menu.
The options are as follows:
• [DES]
• [AES]
[Privacy Passphrase]
Set the privacy passphrase.
Appears only if you have selected [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Read-Write]
Set the read-write function.
The setting items are as follows: