SATO S84NX - Page 201

201
[prtMarkerCounterUnit]
Set the unit to use for reporting counter values for subunits.
The options are as follows:
impressions
Report the number of printed labels.
meters
Report the length of printed labels in meters.
[Agent]
Set the Agent function.
The setting items are as follows:
[Enable]
Enable or disable the functions for Agent.
The options are as follows:
Enabled
Enable the functions for Agent.
Disabled
Disable the functions for Agent.
[Read-Only]
Set the read-only function.
The setting items are as follows:
[SNMP Version]
Set the SNMP version.
The options are as follows:
• [1|2c|3]
• [1|2c]
• [3]
• [Disabled]
[Community]
Set the read-only community name.
Appears only if you have selected [1|2c|3] or [1|2c] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: public
[User]
Set the read-only user name.