SATO S84NX - Page 200

[Network]
200
The options are as follows:
Enabled
Enable the DNS Lookup function.
Disabled
Disable the DNS Lookup function.
[FTP]
Set the functions for FTP.
The setting items are as follows:
[Enable]
Enable or disable the functions for FTP.
The options are as follows:
Enabled
Enable the FTP function.
Disabled
Disable the FTP function.
[FTP Timeout]
Set the connection timeout period between the product's FTP server and clients.
Specify the maximum number of seconds that the product's FTP server will allow clients to stay
connected without receiving any data on either the control or data connection.
The setting range is from 10 to 3600 seconds.
[SNMP]
Set the functions for SNMP.
The SNMP function enables you to monitor and manage a UDP/IP based network.
The setting items are as follows:
[sysContact]
Set the contact information.
You can enter 0 to 255 characters. Alphabets, numbers and symbols can be used.
[sysName]
Set the name information.
You can enter 0 to 255 characters. Alphabets, numbers and symbols can be used.
[sysLocation]
Set the location information.
You can enter 0 to 255 characters. Alphabets, numbers and symbols can be used.