SATO S84NX - Page 204

[Network]
204
[Privacy Protocol]
Set the privacy protocol.
Appears only if you have selected [Privacy] in the [User Security] menu.
The options are as follows:
• [DES]
• [AES]
[Privacy Passphrase]
Set the privacy passphrase.
Appears only if you have selected [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Traps]
Set the Traps function.
The setting items are as follows:
[Enable]
Enable or disable the functions for Traps.
The options are as follows:
Enabled
Enable the Traps function.
Disabled
Disable the Traps function.
[SNMP Version]
Set the SNMP version.
The options are as follows:
• [1]
• [2c]
• [3]
[IP Version]
Set the IP version to use for trap destinations.
The options are as follows:
4
Set the IP version to IPv4.
6
Set the IP version to IPv6.