SATO S84NX - Page 211

211
[QR code offset] (SOS users only)
Adjust the print position for printing a QR code displayed on the notification screen for SOS (SATO
Online Services).
Appears only if you have selected [On-Demand] in the [SOS Mode] menu.
Available only if you have selected [Print] in the [Update Screen] menu.
The setting items are as follows:
Vertical
Adjust the print position of the QR code in the vertical direction.
Set the correction value from the print reference position as "-" for the direction of the paper feed
and "+" for the direction opposite to the paper feed.
Standard/Left-Hand Type Opposite/Right-Hand Type
(1) Feed direction (1) Feed direction
The setting range is from -792 to +792 dots.
Horizontal
Adjust the print position of the QR code in the horizontal direction.
Set the correction value from the print position when facing the product as "-" to adjust to the back
side and "+" to adjust to the front side.