SATO S84NX - Page 212

[Network]
212
Standard/Left-Hand Type Opposite/Right-Hand Type
(1) Feed direction (1) Feed direction
The setting range is from -792 to +792 dots.
• The length of 1 dot varies depending on the print resolution of the product.
◦ 203 dpi : 1 dot = 0.125 mm (0.0049")
◦ 305 dpi : 1 dot = 0.083 mm (0.0033")
◦ 609 dpi : 1 dot = 0.042 mm (0.0017")
• You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
[Daily Checkup] (SOS users only)
Shows the current product information with a QR code. Scan the QR code with a tablet or smartphone,
and send it to the SOS cloud.
Also, the product information can be acquired via NFC and sent to the SOS cloud.
Appears only if you have selected [On-Demand] in the [SOS Mode] menu.
A specialized application is required to scan the QR code or send the product information to the SOS
cloud.
If you have selected [Print] in the [Update Screen], press the button to print the QR code.
To print the QR code, use media of more than 33 mm (1.3") in length and more than 33 mm (1.3") in
width (not including the liner).
[Port diagnostic] (SOS users only)
Diagnoses the network environment to determine whether the Real-Time mode and the Light mode
can be used when connecting to SOS.
Pressing the button shows [Are you sure?] on the screen, and then pressing the
button starts the port diagnostic.