SATO S84NX - Page 251

251
You can change this if you have selected [Custom] in the [Code Type] menu.
The setting range is from 00 to ff (hexadecimal).
[Label Rotation]
Set the page orientation for label printing.
The label size set in the product is used as a reference for rotation.
The options are as follows:
0 degree
Labels are printed in a portrait orientation.
90 degree
Labels are printed in a landscape orientation.
180 degree
Labels are printed in an inverse-portrait orientation.
270 degree
Labels are printed in an inverse-landscape orientation.
[SOP Emulation]
Set the SOP emulation.
The options are as follows:
• [Disabled]
• [Prodigy Plus - 110]
• [Allegro - 220]
• [Prodigy - 250]
• [Auto]
[Compatible Mode]
Set the compatible mode for SDPL.
The setting items are as follows:
[TTF]
Enable or disable TrueType font compatible mode.
The options are as follows:
Enabled
Enable TrueType font compatible mode. The bold TrueType fonts are printed in smaller pitch.
Disabled
Disable TrueType font compatible mode.
[Graphics]
Set whether to allow the registration of graphic data even if a line feed code is omitted.