[SDPL]
252
The options are as follows:
Enabled
Allow the registration of graphic data even when a line feed code is omitted.
Disabled
Do not allow the registration of graphic data when a line feed code is omitted.
[Compression]
Set whether to accept graphic data created by a unique compression method.
The options are as follows:
Enabled
Accepts graphic data created by a unique compression method.
Disabled
Does not accept graphic data created by a unique compression method.
[Right-to-Left print]
Set the Right-to-Left printing function.
The options are as follows:
Disabled
All texts are printed from left to right.
Auto
When an Arabic font is detected, the Arabic text is printed from right to left.
[Receive TimeOut]
Set a period of time the product stays in binary data receiving mode.
When the specified period of type passes, the product exits from binary receiving mode and scans for
SDPL commands.
The setting range is from 0 (off) to 9999 ms.
[Blank Item Feed]
Set whether to feed a label with nothing printed on it when the product receives label formatting
commands that do not generate any printable image.
The options are as follows:
Enabled
Feeds a label with nothing printed on it.
Disabled
Does not feed a label with nothing printed on it.
To Next Page
Loading...