SATO S84NX - Page 257

257
The options are as follows:
Enabled
Enable the <STX>a command.
Disabled
Disable the <STX>a command.
[SOH Commands]
Set the SOH commands.
You can change this setting if you have selected [Settings] in the [Prioritize] > [SOH Commands]
menu.
The setting items are as follows:
[All Commands]
Enable or disable all the SOH commands. You can also select to set each command individually.
The options are as follows:
Disabled
Disable all the SOH commands.
Enabled
Enable all the SOH commands.
Custom
Enable or disable each type of the SOH commands individually.
[SOH-B Command]
Enable or disable the SOH-B command.
Available if you have selected [Custom] in the [All Commands] menu.
The options are as follows:
Enabled
Enable the SOH-B command.
Disabled
Disable the SOH-B command.
[SOH-C Command]
Enable or disable the SOH-C command.
Available if you have selected [Custom] in the [All Commands] menu.
The options are as follows:
Enabled
Enable the SOH-C command.