281
WIFI00xx.bin
Received data through wireless LAN.
• You can print or delete the files created inside "hexdump/" of the product from [Log
Files] menu.
[Buffer Dump]
Save the receive buffer data to the product.
Available if you have set to [Disabled] in the [Hex Dump Mode] menu.
Press the [START] button ( button) on the startup screen to save the data to the product.
Save the receive buffer data to "buff/" in the product.
• The data files of the receive buffer are created for each type of interface.
• The details of the files created in "buff/" in the product are as follows:
LAN0001.bin
The contents of the receive buffer for LAN.
NFC0001.bin
The contents of the receive buffer for NFC.
PIPE0001.bin
The contents of the receive buffer for pipe.
SCI0001.bin
The contents of the receive buffer for RS-232C.
USB0001.bin
The contents of the receive buffer for USB.
WIFI0001.bin
The contents of the receive buffer for wireless LAN.
• If you perform the [Buffer Dump] again, the existing file will be overwritten.
• You can print or delete files from the [Log Files] menu.
[Log Files]
Manage the log files of the product.
The setting items are as follows:
[Copy]
Copy the log files of the product to the USB memory.
Available only if you have installed the USB memory.
To Next Page
Loading...