SATO S84NX - Page 282

[HEX-Dump]
282
• Be sure to perform a virus check on the USB memory before connecting it to the
product. SATO Corporation shall not be held responsible for any product malfunctions
caused by a virus spread via USB memory.
The procedure to copy the log files is as follows:
1.
Select the file type to copy and press the button.
◦ buff/
The buffer data saved when you perform the [Buffer Dump].
◦ hexdump/
The received data created through [Hex Dump Mode].
2.
Select the file to copy and press the button. A check mark appears on the right side of the
file name.
3.
After you select the file, press the button to copy the selected file to the USB memory.
• When [Hex Dump Mode] is set to [Enabled], it may take some time before the files
appear.
[Remove]
Delete the log files of the product.
The procedure to delete the log files is as follows:
1.
Select the file type to delete and press the button.
◦ buff/
The buffer data saved when you perform the [Buffer Dump].
◦ hexdump/
The received data created through [Hex Dump Mode].
2.
Select the file to delete and press the button. A check mark appears on the right side of
the file name.
3.
After you select the file, press the button to delete the selected file.
• When [Hex Dump Mode] is set to [Enabled], it may take some time before the files
appear.
[Print]
Print a hex dump of the log files of the product.
The procedure to print the log files is as follows: