Printing RFID Tag Errors
384
TAG NOT FOUND Error in RFID Write
Command
(1) Feed direction
(2) The origin of the range specified by the media size command <A1>
(3) The range specified with the media size command <A1>
If not specified by the media size command <A1>, the product prints the RFID error using a fixed size
of P30 X W40 mm (P1.18" X W1.57"). When a character overlaps with the slash, the character will
inverse from black to white.
WRITE TAG ERROR in RFID Write Command READ TAG ERROR in RFID Read Command
For other errors, the product prints the error
message accordingly.
To Next Page
Loading...